Business Hours: Tuesday - Saturday 9 a.m. - 5 p.m. (PST)

For a Square e-Gift card holder, please contact us before placing an order with it. Thank you!

We'll be closed from Sunday November 3rd to Monday December 2nd for a business travel to Japan and Thanksgiving. We'll be reopened from Tuesday December 3rd.

Thank you for your patronage as always!

#3000

3000 grits
205mm (8-1/8") x 75mm (3") x 25mm (1")
Vitrified*
White

Available Options

$125

Soak the stone for about 20 minutes, or until the stone stops producing bubbles. And splash water on the stone as needed.

*Ceramic/High pressure cast and 1300 degree celcius treated

**Outlet: These stones have a shipping damege in a corner of the stones.

It is a medium fine stone after using a medium grit (#1000 or #1200)

It is a popular stone amoung planing competiters in Kezurou-kai Japan.

previous item

#2000

next item

#4000

Reviews

This stone has a good SOILD hard feel and comfortable feed back. It is not an ordinary stone but rather one that has many attributes that become evident when you get into using it. It leaves a hazy finish and after initial honing removes scratches from prior rougher stone. You can keep adjusting and tuning the edge and refining the shape to achieve a true flat even surface, I think it feels more like a natural stone than many ceramic stones do. It continues to remove hard and soft steel and sharpens without producing new scratches.

October 9, 2023 by Ward Wilcox

This stone has a good SOILD hard feel and comfortable feed back. It is not an ordinary stone but rather one that has many attributes that become evident when you get into using it. It leaves a hazy finish and after initial honing removes scratches from prior rougher stone. You can keep adjusting and tuning the edge and refining the shape to achieve a true flat even surface, I think it feels m... read more↓
If we're going to agree your 4000 grit stone is 4000, then the 3000 is as I've said definitely around 2500. It will keep turning a burr if you stay on the stone. The 4000 will not. When freshly dressed it cut's like 2000-2500 but it's not very friable, meaning new particles don't keep coming up and the slurry on the stone just keeps getting finer and finer. After about 10min on the stone I would rate the 'polish' at about 6000. What's really pretty cool is perhaps I got into the 'meat' of the stone (continued dressing) and now..... I REALLY like it! It's very similar to the 2000 but a little harder, I went from 1000 to the 3000 and it got out all the scratches no problem, and set the blade up well for final finishing. It's a little hard so it holds the 1K geometry well.

February 14, 2019 by Scott Nehring

If we're going to agree your 4000 grit stone is 4000, then the 3000 is as I've said definitely around 2500. It will keep turning a burr if you stay on the stone. The 4000 will not. When freshly dressed it cut's like 2000-2500 but it's not very friable, meaning new particles don't keep coming up and the slurry on the stone just keeps getting finer and finer. After about 10min on the stone I woul... read more↓

Add a review